Charpy impact tester Detailed information:
Digital Charpy impact tester
Digital Charpy impact tester Product introduction
Digital charpy impact testing machine it’s used to test the impact toughness of the non-metallic materials such as rigid plastic, reinforced nylon, glass fiber reinforced plastic, ceramics, cast stone, plastic appliance and insulation materials. It is widely used in the scientific research institutes, universities and chemical industry as the common quality test equipment.
It’s used to test the impact toughness of the non-metallic materials such as rigid plastic, reinforced nylon, glass fiber reinforced plastic, ceramics, cast stone, plastic appliance and insulation materials. It is widely used in the scientific research institutes, universities and chemical industry as the common quality test equipment.
Plastic Charpy impact tester Performance standards
ISO179—2000 Determination of Plastics - Hard Materials Charpy Impact Strength
GB/T1043—2008 Rigid Plastic Charpy Impact Test Method
JB/T8762—1998 Plastics Charpy Impact Testing Machine
GB/T 18743-2002 Charpy Impact Test Method for Fluid Transport Via Thermoplastic Pipe (Suitable for pipe pieces)
Plastic Charpy impact tester Product features
A. High-precision intelligent controller equipped with LCD display which you can read the data intuitively and accurately;
B. China's first carbon fiber lever (It has been patented); it succeeds in doing experiments without shaking involving the impact direction, improving the rigidity of materials, and concentrating impacting strength on the centroid of the pendulum, and using life increases.
C. Imported high-resolution digital encoders, higher and more stable angle measurement accuracy;
D. Aerodynamic impact hammer and imported ball bearings greatly reduce mechanical friction losses
E.Automatic calculation of the final result, 12 sets of the test data can be stored and averaged;
F. Optional interface of Chinese and English; units ( J / m, KJ / m2, kg-cm / cm, ft-ib / in )can be customized according to customers’ requirements.
G. Built-in mini printer to print the test data
Technical Specifications
Impact speed:2.9m/s or 3.8m/s;
Distance from the center of pendulum to the center of sample: 21mm, 380mm
Pendulum angle:150°
Distance from the center of pendulum to striking edge:335mm
Jaw support distance :40mm, 60mm, 70mm, 95mm
Supporting cutting edge radius:R=1mm
Angle of striking edge: 30°
striking edge radius: R=2mm±0.5mm
Specifications Option
Type |
CHARPY-5D |
CHARPY-15D |
CHARPY-50D |
Pendulum energy |
1J, 2J, 4J, 5J |
7.5J, 15J |
25J, 50J |
Pendulum angle |
150° |
||
Impact speed |
2.9m/s |
3.8m/s |
If you are interested in Charpy impact tester, want to know more detailed product information, fill in the table below the direct contact with the manufacturers: |
Related products: |