1000℃ High temperature muffle furnace

Product introduction of small benchtop muffle furnace:

1.High temperature muffle furnace is designed specifically for laboratory ashing applications. With a special intake and exhaust system that is imported ashing furnace, the equipment can be ventilated more than 5 times per minute. By preheating the intake air, the furnace ensures a good temperature distribution.

2.The heating element adopts three-side heating, the heating speed is fast and the temperature is uniform; the replacement of the furnace wire is convenient and reliable; the panel and the chimney are all made of stainless steel material, and the surface adopts the imported two-color epoxy powder electrostatic spray process.

3.The furnace is made of advanced light materials (0.29 density). Compared with the traditional muffle furnace, the weight is reduced by 2/3, the heating rate is doubled, the energy is saved, and the service life is increased by 4 times.

4.The use of new digital high temperature muffle furnace, temperature intelligent control, can reduce visual and human error, greatly improving work efficiency.

5.With a variety of protection features to improve safety and reliability. Over-temperature protection limiter, according to EN 60519-2 standard thermal protection level 2 to adjust the opening temperature to prevent overheating of the furnace and the workpiece. In addition, this laboratory muffle furnace is also equipped with an observation window furnace body and intelligent controller integrated design, the whole furnace small muffle furnace is beautiful and generous.

Main features of high temperature muffle furnace:

1.Molybdenum-doped resistance wire heating

2.51 section program temperature control

3.N type single platinum rhodium thermocouple temperature measurement

4.The maximum temperature is 1000~1800℃

5.Insulation material: ceramic fiber, polycrystalline alumina fiber material, polycrystalline mullite fiber board, ceramic board

6.Heating material: resistance wire, silicon carbon rod, silicon molybdenum rod

7.Thermocouple specifications: K type, S type, B type

Technical parameters of laboratory muffle furnace:

1. Small benchtop muffle furnace effective size (deep-width-height) mm:

  200×150×150 300×200×200 300×300×300 400×200×200

  500×300×200 500×300×300 600×400×400 800×500×500

  The above laboratory muffle furnace size is a regular spot product, and the larger (special)      furnace size can be customized according to customer requirements, and the production cycle is slightly longer.

2.Working temperature: 1000℃,1200℃,1400℃,1600℃,1800℃

3.The highest temperature: 1000℃,1200℃,1400℃,1600℃,1800℃

4.Temperature control mode: intelligent 51-segment programmable control

5.The fastest rate of temperature rise: 50 ° C / min

6.Constant temperature accuracy: ± 1 ° C

7.Furnace door structure: Left and right open type

8.Working power: AC220V /50HZ/60HZ or AC380V /50HZ/60HZ or AC110V /50HZ/60HZ

9.Rated power of small muffle furnace: 4KW~50KW (different working size different power)