Current location：Home > Products Metal testing machine > Charpy pendulum impact tester for metal > computer-control charpy pendulum impact testing equipment for metal
Name：computer-control charpy pendulum impact testing equipment for metal
Model：
Description：无
computer-control charpy pendulum impact testing equipment for metal Detailed information：
The computer-control charpy pendulum impact testing equipment for metal
The computer-control charpy pendulum impact testing equipment for metal is used to determine the impact resistance of metal materials under dynamic load to determine the properties of the material under dynamic load. The absorbed energy of the sample is obtained by the way that the difference between the pre-position energy of the pendulum impact and the remaining position energy after the impact is displayed on the dial. The maximum impact energy is 500J, and a 250J pendulum is attached. The section of the sample used is (10×10)mm. This Computer-control charpy impact testing equipment for metal has a large impact energy and is suitable for ferrous metals with high impact toughness, such as steel and its alloys.
This computer-control charpy pendulum impact testing equipment for metal is a semi-automatic control testing machine, electrical control automatic swing, impact and put pendulum, easy operation, high work efficiency. After throwing off the sample, the remaining energy is automatically thrown to prepare for the next impact test. Therefore, the superiority of the impact test can be demonstrated in the test room where the impact test is carried out continuously and in a large number of metallurgy and mechanical manufacturing plants that perform the impact test.
This computer-control charpy impact testing equipment for metal is equipped with a computer and a printer, with dual control dual display function. This Computer-control charpy impact testing equipment for metal adopts PLC automatic control and measurement, and performs calculations according to the reverse lift angle of the pendulum after the test sample is punched. It automatically displays the reverse lift angle β value and the absorbed power of the pendulum to the sample. Impact toughness ak value, and computer and special data processing and control software for data editing and generate test reports, can also store and print test data, the average power of the three tests, and test time and serial number and other content, but also to achieve data Remote transmission.
The main body of Computer-control charpy pendulum impact testing equipment for metal adopts cast steel material, which makes it rigid in the whole test process, has strong impact resistance, is not easy to be deformed, has accurate test results and has a long service life. The use of high-torque clutches and high-power motors makes it more stable and vibration-free when the pendulum is placed and placed.
The machine is developed and produced in accordance with the national standard GB/T 3808-2002 "Inspection of the pendulum impact tester". According to the national standard GB/T 229-2007 "The Charpy Pendulum Test Method for Metallic Materials", the impact test on metallic materials is carried out. Meet JJG 145-2007 "pendulum impact tester verification procedures." If you change the structure and replace the relevant parts, you can meet the requirements of the American Standard, European Standard ASTM E23, EN 10045, ISO 148, ISO 83 and other international relevant standards.
Main technical specifications:
1. Impact energy: 500J 300J
2. Energy range： 0-500J 0-300J
3. Pendulum torque: 0-500J M=267.9492N.m
0-250J M=133.9746N.m
4. Pendulum pre-angle: 150°
5.Swivel axis rotation center to impact point (sample center) Distance: 800mm
6. Impact speed: 5.4m/s
7. Sample holder span: 40mm
8. Support jaw fillet: R（1.0～1.5）mm，(1mm for special order)
9. Blade radius of curvature: R（2.0～2.5）mm (8mm for special order)
10. Specimen bearing support surface inclination: 11°
11. Impact blade angle: 30°
12. Impact blade thickness: 16mm
13. Measuring angle range: 0-360°
14. Angle resolution: ≤0.06°
15. Specimen specification: 10×10（7.5or5）×55 mm
16.Host Dimensions (Length × Width × Height):（2230×640×1480）mm
17. Host weight: 520Kg
18. Power supply:Three-phase four-wire system380V50Hz700w
Main motor 550W
19. Working conditions:
1.Room temperature 20 °C ± 5 °C range;
2.Relative humidity is not more than 85%;
3.No corrosive medium around, no vibration, no strong electromagnetic interference in the environment;
4.Installed on a concrete foundation with a thickness of not less than 200mm
or fixed on a foundation of more than 1400Kg;
5. The base level of the mounting base is adjusted to 2/1000.
20. Main configurations:
1.500J or 300J host one
2.300J or 500J Pendulum one
3.Brand computer one
4.Brand Color Inkjet A4 Printer one
5.Dedicated data processing and control software one set
6.Span board one
7.Specimen centering device one
8.Remov
| If you are interested in computer-control charpy pendulum impact testing equipment for metal, want to know more detailed product information, fill in the table below the direct contact with the manufacturers: |
| Related products： |
