Current location：Home > Products Metal testing machine > Charpy pendulum impact tester for metal > Metal charpy pendulum impact testing machine
Name：Metal charpy pendulum impact testing machine
Model：
Description：Semi-automatic metal charpy pendulum impact testing machine is used to test metallic materials to resist the impact to determine the nature of the material under dynamic load performance.
Metal charpy pendulum impact testing machine Detailed information：
Metal charpy pendulum impact testing machine
Semi-automatic metal pendulum impact testing machine is used to test metallic materials to resist the impact to determine the nature of the material under dynamic load performance.
This machine is semi-automatic metal pendulum impact testing machine. Its rising pendulum, hanging pendulum, sending specimen, positioning and impacting all controlled by pneumatic and electric appliance, which is easy to operate and has high efficiency. After impacting the specimen, the machine can raise pendulum with surplus energy automatically so as to be ready for the next impacting test.
Semi-automatic metal charpy pendulum impact testing machine conduct impact test for metallic materials is in line with national standard GB/T3808-2002 “pendulum-type impact test machine inspection”, according to national standard GB/T229-2007 “metallic materials Charpy pendulum impact test method”.Meet JJG 145-2007 "pendulum impact tester verification procedures." If you change the structure and replace the relevant parts, you can meet the requirements of the American Standard, European Standard ASTM E23, EN 10045, ISO 148, ISO 83 and other international relevant standards.
Semi-automatic metal charpy impact testing machine main parameters:
1. Impact energy: 150J, 300J,500J
2. Range of plate-scale and sub-scale value
Range of energy 0-300J 0-500J
3. Angle of rising pendulum in advance: 150º
4. Distance from centre of pendulum and impacting point: 800mm
5. Semi-automatic metal pendulum impact testing machine impacting speed: 5.4m/s
6. Span of impact specimens supports: 40mm
7. Arc radius of impact specimens supports ends : National standard: GB/T3808 R1-1.5mm(1mm is special orders)
8. Sample pedestal supporting surface Angle: 0°
9. Round corner of impacting edge: National standard: GB/T3808 R2-2.5mm (8mm is special orders)
10. Impact knife angle:30°
11. Thickness of impact knife:16mm
12. Size of specimen: 10*10*55mm (sample length≤55mm)
13. Semi-automatic metal charpy impact testing machine speed of sending specimen:≤4S
14. Capacity of specimen case: 10 pieces
15. Motor power: 250W
16. Electric power: three-phase 380V 50Hz
17. Size of host outline (L*W*H): 2300mm*600mm*1400mm
18. Net weight of metal charpy pendulum impact testing machine: about 800kg
| If you are interested in Metal charpy pendulum impact testing machine, want to know more detailed product information, fill in the table below the direct contact with the manufacturers: |
| Related products： |
