Product search
Product classification
Current location:Home > Products Plastics Testing Machine > Melt flow index > Plastic Melt Flow Index Testing Machine

Name:Plastic Melt Flow Index Testing Machine

Model:KL-MI-AP

Description:Plastic Melt Flow Index Testing Machine meets the demands of GB/T3682-2000, as well as ISO1133-97, ASTM D1238,JIS K7210 and other standards involving main parameters.

Plastic Melt Flow Index Testing Machine Detailed information:

Plastic Melt Flow Index Testing Machine

 

Product introduction

Plastic Melt Flow Index Testing Machine meets the demands of GB/T3682-2000, as well as ISO1133-97, ASTM D1238,JIS K7210 and other standards involving main parameters. The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate. Plastic Melt Flow Index Test Machine is widely used in plastic production, plastic products,  petrochemical industries and related institutions, research institutes and inspection departments.

Plastic Melt Flow Index Testing Machine Software features

A. High-precision color controller in English and Chinese; special customized membrane keypad;  incomparable advantages in the control precision and service life.

B. Automatic cutting, accurately up to 0.1s; setting the cutting time and the number of cutting freely.

C.Melt flow index tester Built-in mini printer to print the test data

D. Dual temperature control system:double imported heating coil, double imported PT100 platinum resistance sensor, independent temperature control of the upper and lower sections, to improve the test accuracy and stability of temperature.

 

Plastic melt flow index test machine test mode

MFR or MVR

Plastic melt flow rate tester Display mode

Color LCD in English

 

Plastic melt flow index testing machine performance standards

 

Temperature range:normal temperature-400℃

Temperature fluctuation:±0.2℃

Temperature uniformity:±0.5℃

Plastic melt flow rate tester temperature display resolution:0.1℃

Time display resolution:0.1S

cylinder diameter:Φ2.095±0.005mm

The length of the discharge hole:8.000±0.025mm

Charging cylinder diameter:Φ9.550±0.025mm

Melt flow index tester weight accuracy:±0.5%

Output mode: automatically printing via mini printer

Cutting mode:cutting by hand or automatically

Plastic melt flow index test machine test load:total 8 grades,8 sets of weight

Power voltage:AC220V±10%   50HZ

 If you are interested in Plastic Melt Flow Index Testing Machine, want to know more detailed product information, fill in the table below the direct contact with the manufacturers:

Your name:
Tel:
Add:
E-mail:
Consulting content:
Verification code:

Note: Please fill in the contact information correctly, we will reply you in the form of mail! Thank you for your support!


 Related products: