Product search
Product classification
Article
Current location:Home > Article > Detailed content
Hot air oven
Click:728 Release time:2017-07-15

Use manuals:

 

Usage

Product introduction:

It is applicable to testing, baking, drying and sterilization of non-volatile items used in industrial andmining enterprises, schools, medical and scientific research units.

 

Product structure and features:

                                      

 

                        

 

 

 

 

 

 

Use method

1Before power on, make sure that the switch is set to "OFF" and check for open circuit or leakage.

2Due to the first heating the chamber will have a slight smoke, so before the official use, it is recommended not to put the sample. Close the door, unscrew the roof exhaust cover, and open the electric switch, blast switch, and light. Make temperature switch in the "slow" file, and set the temperature controller at 100 . At this time the box began to heat up to 100 , and the thermostat automatically control thermostat, and then cut off the power, open the door to cooling.

3When official use, first put the sample on the shelf, close the door, open exhaust cover, connect to the power, open the electric switch, the blast switch, then you can choose to use heating fast, slow key, and then set the temperature controller at the required temperature. At this time the box began to heat up, until the temperature is constant. The temperature should be set in the "slow" file to ensure constant temperature fluctuations and uniform temperature inside the box.

4In the use of the sample should not be placed too crowded, so as not to affect the convection within the box. When placing the case, please make sure that the cabinet is effectively grounded to ensure safe use. Do not touch the left side of the cabinet with electric or wet cloth.

 5When warming up, do not splash the water on the observation window of the box door to prevent the glass from falling cold.

6This series of dry boxes is for non-explosion-proof products.

7For volatile, flammable and other items, do not put into the box heating, to prevent the explosion.

 

 Note:

1. Oven enclosure must be effectively grounded to ensure safety;

2. After use , should power off;

3. Flammable and explosive materials can not be placed in oven;

4. Oven should be placed in the room with good ventilation conditions, can not be placed in the surrounding flammable and explosive materials;

5. Never place to many objects inside the oven, you must leave an appropriate space to facilitate circulation of hot air;

6. Box inside and outside should be kept clean and sanitary;

7. When the working temperature is too high, power off then to open the door to decrease temperature, finally remove the items later.

8.Without authorization, shall not disassemble the box, if the resulting product is damaged, the responsibility borne by the user.